Copperweld NM-B Cable

Premium CCA Building Wire

Dustin Smith
June 1, 2022

In January of 2018, Copperweld launched its line of Non-Metallic sheathed cable (NM-B) for use in residential and light commercial construction.

Copperweld NM-B meets all the regulatory requirements defined by the National Electrical Code (NEC).  The conductors are manufactured to UL safety specifications using Copper-Clad Aluminum (CCA). CCA has been identified for use with wiring devices, splice connectors and equipment terminals rated for CU, CU/AL and CO/ALR.

Theft has been a prominent issue in residential installations; to combat this issue, the ingenuity of CCA’s bi-metallic bond makes it virtually impossible to separate, diminishing its consumer-channel scrap value.

Copper-Clad Aluminum NM-B is 20% lighter than copper NM-B when upsized. The reduction in weight decreases the amount of pulling tension, resistance, and effort required to transport wire around the job site.  This ensures a more efficient workflow and decreases the risk of injury.

Copperweld’s CCA contains 8000 series aluminum, which is bi-metallically bonded with 99.9% oxygen free copper.  When upsized, CCA results in a more energy-efficient conductor that operates at a lower temperature at the point of termination than traditional copper NM-B.

All CCA wiring practices comply with Article 334 of the NEC and should be sized according to NEC Table 310.16.

Learn more about Copperweld Cu-Clad NM-B:
Right Arrow Icon
Share